Honda Outboard Motor BF130A Owner's Manual page 37
Honda power equipment outboard motor owner's manual
Hide thumbs
Also See for Outboard Motor BF130A:
- Owner's manual (130 pages) ,
- Owner's manual (126 pages) ,
- Owner's manual (126 pages)
Table of Contents
Advertisement
Safety Inspection
Look around the outboard motor
for signs of oil or gasoline leaks.
If you are using the portable fuel
tank (optional equipment), make
sure it is in good condition and
properly secured in the boat (p.
38
).
Check that the fuel hose is
undamaged and properly
connected (p.
38
).
Wipe up any spills before starting
the engine.
Check the stern bracket to be sure
the outboard motor is securely
installed.
Check that all controls are
operating properly.
Replace any damaged parts.
Check that all fasteners are in
place and securely tightened.
Maintenance Inspection
Check the engine oil level (p.
Running the engine with a low oil
level can cause engine damage.
Check to be sure the propeller is
undamaged, and the castle nut is
secured with the cotter pin (p.
Check that the anodes are securely
attached to the gear case (p.
and are not excessively worn. The
anodes help to protect the outboard
motor from corrosion.
Make sure an adequate tool kit is
onboard (p.
57
).
Check the fuel level in the fuel
tank (p.
71
).
BEFORE OPERATION
Check that the battery fluid is
between the upper and lower levels,
and the battery leads are connected
securely.
63
).
Check the water separator for
water contamination (p.
78
).
76
)
76
).
35
Hide quick links:
Advertisement
Table of Contents
