Getting Started; Device Appearance - Zte MF60 User Manual

C h a p t e r

Getting Started

ZTE MF60 is a 3G mobile hotspot device, working in EDGE/WCDMA/HSPA network. The client
devices can connect to the device via USB or Wi-Fi interface; the device supports data and SMS services,
enabling you to communicate anytime and anywhere.

Device Appearance

The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.
Right Side
1.Power
2.Memory card
(microSD card)
3.WPS
4. LED Screen
5. External Antenna
Connector
6.Charger/USB port
1
Front
Hold the Power button to switch on/off the device.
slot It is where you insert the memory card (microSD card).
This button is used to start Wi-Fi Protected Setup authentication process
and enable/disable the Wi-Fi function.
 Hold it for three seconds to activate the WPS process.
 Press it to enable/disable Wi-Fi function.
It is to indicate the signal type, signal strength, battery, Wi-Fi, etc.
It is used to connect an external antenna to enhance the signal strength.
 Charge your device.
Confidential and Proprietary Information of ZTE CORPORATION 5
Left Side Bottom