ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0...
Getting to Know Your Device Appearance NOTE: Please use the original external antenna if necessary. Interface Description USB jack Insert the device to USB interface. Ethernet connections to computer in Wireless Broadband • mode. Connect to the Internet in Cable Broadband mode. •...
Page 4
Indicators Indicator State Description Power is on and external power supply is Blue on working normally. POWER Power is off or external power supply is working abnormally. Wi-Fi works normally with no data Blue on transmission. Wi-Fi works normally with data Blue blinking WIFI...
Indicator State Description transmission. The network cable is not connected. NOTE: The phone function needs the network support. Connecting Your Device Follow the picture to connect your device. Please refer to the chapter “Accessing the Internet”. If you want to use the mobile network to connect to the Internet or use your home phone, you need insert your (U)SIM card first.
Configuring Your PC The following procedure describes how to configure the Internet Protocol in the Windows 7 for your Wi- Fi connection. Right-click Network and select Properties. Select Change adapter settings. Right-click Wireless Network Connection and select Properties. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
Page 7
Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.
Accessing the Internet Before accessing the Internet, please make sure that the following operations are finished. Your device is connected via a network cable or Wi-Fi. • Your PC is configured. • To access the Internet: Log in the CPE configuration page. 1.
NOTE: If you change the operation mode, the device will be restarted automatically. Set the detail parameters for the operation mode. Voice Function Making a Call You can make a call through (U)SIM card. 1. Pick up the handset. 2. Key in the telephone number. 3.
Power on your device, and enable the Wi-Fi function on your device. Enable the WPS function. Please check the WPS Setting on the CPE Configuration Page. Press the WPS button on your device to start Wi-Fi Protected Setup authentication process. Enable the WPS function on your client to respond to this authentication process.
You can find the default SSID on the label of your device. Enter the password, and then click OK. NOTE: You may need to enter the password for the Wi-Fi connection. You can view the label on your device to get the default password.
Page 12
The default password of the CPE Configuration Page About the password is admin. • If you changed the password and forgot the new password, you need to restore the device to the factory default settings. For more assistance, please: Send email to mobile@zte.com.cn • Visit www.ztedevices.com •...
Do not use your router in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed. Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the router performance, damage the router or cause danger to you.
Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.
This radio equipment operates with the following frequency bands and maximum radio-frequency power. NOTE: All ZTE products are compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model. GSM 900: 32 dBm GSM 1800: 29.5 dBm...
For this product’s recycling information based on WEEE directive, please send an e-mail to weee@zte.com.cn EU DECLARATION OF CONFORMITY Hereby, ZTE Corporation declares that the radio equipment type ZTE ZTE MF253V is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:...