Blade Bolt Tightness/Blade Replacement; Blade Removal - Honda HT3810 Owner's Manual

.,
10. Blade bolt tightness/Blade replacement
mm!
To avoid severe personal injury, remove the ignition key and
disconnect the spark plug cap to prevent accidental starting; wear heavy
gloves to protect your hands from the cutter blade.
n
Blade bolt tightness
- 1. Remove the cutter deck from the tractor (see page 38).
-2. Turn the cutter deck upside down.
-3. Clean dirt and grass from the blade and the inside of the cutter deck.
-4. Hold the blade firmly, and use a torque wrench to check that the
blade bolt is properly tightened.
Blade bolt torque: 4.5-5.5 kg-m (32.6-39.8 ft-lb)
TORQUE
W Blade removal
- 1. Hold the blade firmly, and remove the blade bolt and the washer.
-2. Remove the blade and blade holder.
- DISCHARGE
SIDE
51