Blade Belt Replacement - Honda HT3810 Owner's Manual

9. Blade belt replacement
1. Lower the cutter deck, remove the six yellow colored lock pins (see p. 37)
and remove the cutter deck.
2. Remove the bolt and nuts and then remove the pulley covers.
3. Pull the belt off pulley A, hold the belt securely and slowly release the
idle pulley.
CAUTION: If the belt is not released slowly, the idle pulley will move sud-
denly and could injure your hand.
4. Remove the belt from the other pulleys, and replace the belt.
PULLEY
PULLEY A
50