Blade Condition - Honda HT3810 Owner's Manual

10. Blade condition
Before each use, check the cutter blades for damage or excessive wear.
m To avoid severe personal injury, remove the ignition key and
disconnect the spark plug cap to prevent accidental starting; wear heavy
gloves to protect your hands from the cutter blades.
1. Move the P.T.O. lever to the OFF (disengaged) position, and raise the
cutter deck height adjusting lever to the highest position.
2. Inspect both blades for cracks, bending, or wear. The right blade can be
seen through the discharge opening on the right side of the cutter deck.
The left blade can be seen under the left side of the cutter deck. Turn
the blades 180' to inspect the opposite ends.
DISCHARGE COVER
23