Assembly - NordicTrack 30706.0 User Manual

ASSEMBLY

Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
In addition to the included hex keys, assembly requires a phillips screwdriver and an
adjustable wrench .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 18. The number following the
parentheses is the quantity used in assembly. Note: Some small parts may have been preassembled for
shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M4 x 12mm
M10 Split M4 x 16mm M4 x 19mm
Screw (64)–1
Washer (55)–3 Screw (54)–6 Screw (47)–2
M6 x 10mm M6 x 30mm Button M10 x 50mm Button
Screw (60)–2 Screw (46)–4 Screw (48)–3
M10 x 85mm Button
Screw (56)–4
1. Attach the Front Stabilizer (2) to the Frame (1) with
1
two M10 x 85mm Button Screws (56).
1
2
56
5