Fig. 3
auger motor
(side view)
auger bearing
plate
Disassembly instructions for service requirements only – NOT required for
any cleaning procedure
Dispense wheel motor removal
1. Remove drain pan, bin access cover and dispense wheel.
2. Remove stainless steel baffle plate under dispense wheel.
3. Remove two screws holding wheel motor bracket on bin.
4. Lift plate and motor up.
5. Unplug electric quick disconnects from motor.
6. Lift motor and mounting plate out front access opening.
Front view
rotating
agitator
baffle
plate
wheel motor
mounting plate
Service
(Fig. 3)
auger
auger tube
12
dispense wheel
stationary
agitator
wheel
motor
plain water
hook-up
chilled water coil