Field Setting; Field Setting From Remote Controller - Daikin FCQ18PVJU Service Manual

Field Setting

3. Field Setting
3.1

Field Setting from Remote Controller

Individual functions of indoor unit can be changed from the remote controller. At the time of
installation or after service inspection / repair, make the local setting in accordance with the
following description.
An incorrect setting may cause malfunction.
3.1.1 Wired Remote Controller <BRC1D71>
If optional accessories are mounted on the indoor unit, the indoor unit setting may have to be
changed. Refer to the instruction manual for each optional accessory.
1. When in the normal mode, push the "
2. Select the desired MODE NO. with the "
3. During group control, when setting by each indoor unit (mode No. 20, 22 and 23 have been
4. Push the "
5. Push the "
6. Push the "
7. Push the "
 Example
When setting the filter sign time to "Filter Contamination Heavy" in all group unit setting, set the
Mode No. to "10", first code No. to "0" and second code No. to "02".
47
UNIT NO.
SECOND
CODE NO.
FIRST
CODE NO.
1 7
FIELD SET MODE is entered.
selected), push the "
operation is unnecessary when setting by group.)
" upper button (Q) and select FIRST CODE NO.
" lower button (R) and select the SECOND CODE NO.
" button (S) once and the present settings are SET.
" button (T) to return to the NORMAL MODE.
TEST
Unit NO.
SETTIING
3
4
TEST
5
2
6
" button (N) for 4 seconds or more, and the
TEST
" button (O).
" button (P) and select the INDOOR UNIT NO. to be set. (This
SiUS28-902_a
MODE NO.
FIELD
SET
MODE
2P068938
Test Operation