Installing The Front Thermal Sensor; Removing The Power Switch - Dell OptiPlex 9010 Owner's Manual

Installing The Front Thermal Sensor

1. Secure the thermal sensor to the chassis front.
2. Thread the thermal-sensor cable into the chassis clips.
3. Connect the thermal-sensor cable to the system board.
4. Install the hard drive.
5. Install the front bezel.
6. Install the cover.
7. Follow the procedures in

Removing The Power Switch

1. Follow the procedures in
2. Remove the
a) cover
b) front bezel
3. Press in and lift to release the power-switch cable from the system board.
After Working Inside Your Computer .
Before Working Inside Your Computer .
31