Installing The Processor; Removing The System Fan - Dell OptiPlex 9010 Owner's Manual

Hide thumbs Also See for OptiPlex 9010:
Table of Contents

Advertisement

Installing The Processor

1.
Insert the processor into the processor socket. Ensure the processor is properly seated. The golden triangle mark
on the processor should align with the triangle mark on the system board.
2.
Gently lower the processor cover.
3.
Press the release lever down and then move it inward to secure it with the retention hook.
4.
Install the heat sink.
5.
Install the cover.
6.
Follow the procedures in

Removing The System Fan

1.
Follow the procedures in
2.
Remove the
a) cover
b) front bezel
c) optical drive
d) hard drive
3.
Press the plastic clip to release the system-fan cable from the system board.
26
After Working Inside Your Computer .
Before Working Inside Your Computer .

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiplex 7010

Table of Contents