Installing The Hdd Thermal Sensor; Removing The Input/Output (I/O) Panel - Dell Precision Tower 7810 Owner's Manual

5. Release the latch that secures the HDD thermal sensor. Here, the HDD thermal sensor is attached to
the hard drive.

Installing the HDD Thermal Sensor

NOTE: The HDD thermal sensor is an optional component and your computer may not ship with it.
1. Connect the HDD thermal sensor to the SAS HDD component that you wish to monitor the
temperature, and secure it with the latch.
2. Attach the HDD thermal sensor cable to the system board.
3. Install the computer
4. Follow the procedures in

Removing the Input/Output (I/O) Panel

1. Follow the procedures in
2. Remove:
a. computer cover
b. front bezel
3. Remove the screws that secure the I/O panel cage to the chassis.
cover.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
21