Installing The Hdd Thermal Sensor; Removing The Input/Output (I/O) Panel - Dell Precision Tower 5810 Owner's Manual

Installing the HDD Thermal Sensor

NOTE: The HDD thermal sensor is an optional component and your computer may not ship with it.
1. Connect the HDD thermal sensor to the SAS HDD component that you wish to monitor the
temperature, and secure it with the latch.
2. Connect the HDD thermal sensor cable to the system board.
3. Install the computer
4. Follow the procedures in

Removing the Input/Output (I/O) Panel

1. Follow the procedures in
2. Remove:
a. computer cover
b. front bezel
3. Remove the screws that secure the I/O panel cage to the chassis.
4. Remove the I/O panel cage from the chassis.
cover.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
23