After the exit delay expires, Perimeter On
Delayed is shown.
5. To disarm your security system, enter your
personal passcode and press ENTER.
The display then returns to idle text.
Bosch Security Systems | 9/10 | F01U169131-02
D1265 | User's Guide | Part II: System Commands
Silence Trouble Sounder/Clear Trouble
Display (CMD + 4)
Description
Use CMD 4 to silence the trouble sounder during
system events. This command also clears system
messages from the display. The *Alarm Silenced*
display continues to scroll to remind you that cleared
events can be seen with the View Alarm Memory
function. Refer to View Alarm Memory (CMD + 4 + 0)
on page 20.
Using CMD 4
1. Ensure the display shows disarmed idle text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 4 button.
4. The keypad sounder is silenced.
19