Unbypass A Point (Cmd + 0 + 0); Description; Using Unbypass A Point - Bosch D1265 User Manual

Touchscreen keypad

Hide thumbs Also See for D1265:

Table of Contents

7. If the bypassed point is a Fire Point, the

message Fire Point Bypassed begins alternating

in the display with A1 Area Is Off.

8. If the bypassed point is a 24-hour point, the

message 24hr Point Bypassed begins

alternating in the display with A1 Area Is Off.

Bosch Security Systems | 9/10 | F01U169131-02

D1265 | User's Guide | Part II: System Commands

Unbypass a Point (CMD + 0 + 0)

Unbypassing a point is a way to return a bypassed

point to the security system so that it can once again

respond to trouble and alarm conditions.

1. Ensure the display shows disarmed idle text.

2. Press the CMD button. The display shows

*System Command*.

3. Press the 0 button twice.

If you prefer, you might use the function

list in place of Steps 2 and 3 to initiate

this function.

Press the Menu button to enter the

function list.

Press the Next button repeatedly.

When you reach the Unbypass a Point

button, press it.

4. You might be prompted for your passcode. It

appears on the display as asterisks (*).

5. The display changes to show Enter point

number or press next key.

Table of Contents