Part Ii: System Commands - Bosch D1265 User Manual

D1265 | User's Guide | Part II: System Commands

Part II: System Commands

Some of these functions might not be
available in your system. Please consult
your security company to determine
which commands have been made
available to you.
If you attempt to enter a function that is available in
the system but your passcode is not authorized to
perform the function, then **No Authority** shows
on the keypad.
Press the CMD button and then the one or two digits
shown in Table 1 to perform the function. When you
use a command to perform a function, the displays in
the function list below do not appear at your keypad.
Some commands listed in Table 1 might
not be available. Contact your security
company for more information.
12
Table 1: Keypad Commands
COMMAND Function
Master Arm
Master Arm Instant
+
Perimeter Instant
Perimeter Delay
Silence Trouble Sounder and Clear
Trouble Display
View Memory
+
Walk Test
+
Reset Sensors
+
Watch Mode
Special Alert
Perimeter Partial
Special Alert
Bypass a Point
Unbypass a Point
+
Bosch Security Systems, Inc. | 9/10 | F01U169131-02