Seagate MEDALIST 1080SL Product Manual page 84

74 Medalist 1080sl SCSI Product Manual, August 1995
continued from previous page
Error code (hex)
Byte 12 Byte 13
No spare defect locations available during
32 00
format.
GList update full or error during reassign.
32 01
A rounded parameter caused an error.
37 00
The identify message contains invalid bits.
3D 00
3F 00 The target operation command was changed.
3F 01 The firmware/microcode was changed.
40 80 Flash checksum failed during diagnostic.
40 81 Buffer ram failed during diagnostics.
40 82 Sequencer chip failed during diagnostics.
40 83 Disk write/read failed during diagnostics.
Save RB failed during the reassignment of
40 88
blocks ARRE/AWRE.
Read RB failed during the reassignment of
40 89
blocks ARRE/AWRE.
Flash configuration sector error encountered.
40 8A
Servo command time-out.
40 8B
Servo command failed.
40 8C
Attempted to add illegal DList entry to GList
40 90
during format.
Host buffer parity error occurred during host
40 91
DMA.
40 92 SCSI checksum error during download.
40 93 Error in write to flash.
40 94 Internal write failure during reassign.
40 95 Track reformat failed during reassign.
40 96 Restore RB failed during reassign.
43 00 A message error occurred.
44 00 An internal controller error occurred.
Description