Medalist 1080Sl Scsi Product Manual, August 1995 - Seagate MEDALIST 1080SL Product Manual

Medalist 1080sl SCSI Product Manual, August 1995

Error code (hex)
Byte 12 Byte 13
A synchronous transfer error occurred.
1B 00
The defect list could not be found.
1C 00
The primary defect list could not be found.
1C 01
A miscompare occurred during a verify
1D 00
operation.
An ID error was recovered.
1E 00
The drive received an invalid command
20 00
operation code.
The logical block address was not within the
21 00
acceptable range.
The drive received a CDB that contains an
24 00
invalid bit.
The drive received an invalid LUN.
25 00
The drive received an invalid field in the
26 00
Parameter List.
A power-on reset or a bus device reset
29 00
occurred.
The Mode Select parameters were changed
2A 01
by another initiator.
The commands were cleared by another
2F 00
initiator.
The format command failed.
31 01
Seek error while updating head parameters
31 97
during format.
Read error while updating head parameters
31 98
during format.
Invalid head parameter while updating head
31 99
parameters during format.
Flash update error while updating head
31 9A
parameters during format.
Bad format with good head parmeters.
31 9B
Inconsistent or bad head parameter detected
31 9C
during drive initilization.
continued
Description
73