Seagate MEDALIST 1080SL Product Manual page 113

Medalist 1080sl SCSI Product Manual, August 1995
The RelAdr bit is zero, which means that the drive does not
Byte 7
support the relative addressing mode.
The WBUS32 bit is zero, which means that the drive does
not support 32-bit data transfers.
The WBUS16 bit is zero, which means that the drive does
not support 16-bit data transfers.
The SYNC bit is one, which means that the drive supports
synchronous data transfer.
The Linked bit is zero, which means that the drive does not
support linked commands.
The CmdQue bit is one, which means that the drive sup-
ports tagged command queuing.
The Soft Re bit is zero, which means that the drive responds
to a soft reset with a hard reset.
Bytes 8–15 The vendor identification field contains SEAGATE in
ASCII text.
Bytes 16–31 The product identification field contains the model num-
ber of the drive in ASCII text.
Bytes 32–35 The product revision level field contains the last four
digits of the firmware release number in ASCII text.
The drive serial number field contains the serial number
Bytes 36–43
of the drive in ASCII text.
Bytes 44–95 These bytes are reserved; they contain only zeros.
Bytes 96–143 The copyright notice field contains the following ASCII
string: " Copyright (c) 1993 Seagate. All rights reserved."
Bytes 144–147 This is the servo PROM part number field.
103