Determining The 3-Digit Code; Troubleshooting - Radio Shack 15-1931 Owner's Manual

15-1931.fm Page 12 Monday, July 19, 1999 2:26 PM

Determining the 3-Digit Code

After you set up your remote control using manual
code search, you can find which 3-digit code the
remote control is set to by following these steps.
1. Press the device key you want to get the
manufacturer's code from, then hold down
until the red light blinks twice.
2. Press . The red light blinks twice again.
9 9 0
3. Press then count the number of times the
1
red light blinks. This is the first digit of the 3-
digit code.
Note: If the red light does not blink, the digit
is a 0.
4. Repeat Step 3 twice to find the second and
third numbers of your 3-digit manufacturer's
code, pressing and
2
additional digit.

TROUBLESHOOTING

If the remote control stops working after you have
successfully tested the control for each device, or
if you are unable to get the remote control to work
at all, check these things:
• Be sure you press the device key for the
device you want to control before you press
any other key.
• Confirm that your remote control devices are
working properly by using the original remote
control or the manual controls.
• Replace the batteries.
• If some of the keys do not function for your
device, you might be able to find a better
device code.
Need help? Call 1-888-533-7135
12
P
respectively for each
3