Tilt Sensor; Lift Sensor; Collision Sensor - Husqvarna Auto Mower Operator's Manual

Tilt Sensor

The tilt sensor is located in the rear chassis of the mower. In the
event that the mower is not properly shut down by raising the
rear cover, and the mower is lifted from the rear of the machine
or is inadvertently elevated from the front, the blade motor will
automatically shut down, stopping the rotation of the cutting
blades. Only when the mower is returned to its normal level
position will the machine attempt to re-start after approximately
20 seconds.

Lift Sensor

The lift sensor is located under the front nose of the machine. In
the event that the mower is not properly shut down by raising
the rear cover, and an attempt is made to lift the machine off the
ground by any outer section of the body, the blade motor will
automatically shut down, stopping the rotation of the cutting
blades. Only when the mower is returned to its normal position
will the machine attempt to re-start after approximately 20
seconds.
SPECIAL SAFETY FEATURES
Collision Sensors
The collision sensors are located adjacent to the rear wheels
and is the attaching point of the body to the frame. If the
machine bumps into to any firm or solid object in the zone
marked --- during the course of its normal forward movement,
the machine will stop its forward movement, back up and turn
left or right, then resume forward movement.
3
English –