Calibrate Tilt Sensor (5-6-3); Stop Button Override (5-6-4) - Husqvarna Automower Solar Hybrid Technical Manual

To select a new start-up sequence: Place the cursor on
New start-up sequence and press YES. Now press
YES when asked Select new startup?.

Calibrate tilt sensor (5-6-3)

To calibrate, i.e. reset the tilt sensor: Place the
Automower on a horizontal surface. Place the cursor
on Calibrate tilt sensor and press YES. Now press YES
when asked Calibrate tilt sensor?.

STOP button override (5-6-4)

When STOP button override is actuated the
Automower can be started and stopped with the help of
the number 0 instead of the STOP button. This function
is suitable when the display is difficult to read on a
working mower, for example, when charging or running
in Live data mode.
The function is switched off automatically when the
mower is switched off and on using the main switch.
Table 4: Factory settings
Function
Drive past wire
Reversing distance from charging station
Exit angles
Follow loop out
Boundary delay
Guide delay 1
Guide delay 2 (only 230 ACX and Solar Hybrid)
Boundary corridor 1
Boundary corridor 2 (only 230 ACX and Solar Hybrid)
Guide corridor
Timer
Time lock
Stop protection
Settings lock
Square mode cutting (EXP-position)
Sounds Keypad
Sounds Operation
Garden shape
42 - English
2. SPECIAL MENU FUNCTIONS
Value (min – max)
27cm (15 – 50cm), 11" (6" - 20")
60cm, random ± 20cm (15 – 300cm)
24", random ± 8" (6" - 120")
90° – 270° (45° – 315°)
No area activated
11 minutes
7 minutes
7 minutes
10
10
10
No limitation
30 days
Deactivated
Deactivated
230 ACX: 70 %,
220 AC/Solar Hybrid: 50 % (1 % – 100 %)
ON
OFF
Normal