Reviewing And Removing Lock-Outs - Radio Shack 20-405 User Manual

Reviewing and Removing Lock-outs

Stored Channels
1. Hold down L/O
operation. The scanner pulls up a list of locked out channels.
2. Repeatedly press and hold L/O
channel. If an error beep sounds, there are no locked out channels.
. To remove the lock-out, press L/O
Marine Service Bank
1. Press PSE during the Marine Service Bank search.
2. Hold down L/O
list of locked out channels.
. Repeatedly press and hold L/O
channel. If an error beep sounds, there are no locked out channels.
4. To remove the lock-out, press L/O
Other Service Banks
1. Hold down L/O
search.
2. Press e or d repeatedly to scroll through the list of locked-out frequencies.
L/0 appear in the display.
L-r and
/
. Press L/O L/O RV W to remove the lock-out. The list scrolls to the next
locked-out frequency.
n
Notes:
• When you reach the highest locked-out frequency, the scanner beeps twice
and rolls to the lowest locked-out frequency.
• If the Service Bank has no locked-out frequencies, EMPty appears.
Removing Lock-outs from All Frequencies in a Service Bank
1. Hold down L/O
search. L-r appears.
2. While holding down TUNE/CLEAR, press L/O
appears for about two seconds. Then the display alternates with YES - --Ent
and No --CLEAr.
. Press ENT. L-r EMPty appears. The scanner clears lock-outs from all
frequencies in the Service Bank.
/
L/O RV W for about two seconds while in manual
/
L/O RV W to show the next locked out
/
L/O RV W for about two seconds. The scanner pulls up a
/
L/O RV W to show the next locked out
/
L/O RV W for about two seconds during a Service Bank
/
L/O RV W for about two seconds during a Service Bank
/
L/O RV W until
L/0
/
L/O RV W until L/0
/
L/O RV W. FLo ALL–CL
24
disappears.
disappears.