Resetting The Lamp Hours - Epson EB-Z8000WU User Manual

Replacing Consumables
E
Replace the lamp cover.
Press the cover against the unit and slide it to the right until it
clicks.
Attention
•
Make sure you install the lamp securely. If the lamp cover is removed, the
lamp turns off automatically as a safety precaution. If the lamp or the
lamp cover is not installed correctly, the lamp does not turn on.
•
This product includes a lamp component that contains mercury (Hg).
Please consult your local regulations regarding disposal or recycling. Do not
dispose of it with normal waste.

Resetting the Lamp Hours

The projector records how long the lamps are turned on and a message
and indicator notify you when it is time to replace the lamp. After
replacing the lamps and turning on the power, the following message is
displayed on the screen and you can reset the lamp-hour counter.
Select Yes, and then press the [Enter] button.
A
Displays the replacement for the lamp 1.
B
Displays the cumulative lamp operating time. If you select Yes and reset
the Lamp Hours, the count for lamp 1 is set to 0H.
76