Epson EB-Z8000WU User Manual page 103

Glossary
Progressive
Refresh Rate
SDTV
SNMP
sRGB
Subnet mask
(Subnet Mask)
SVGA
S-Video
SXGA
Sync.
Tracking
Trap IP Address
VGA
XGA
A method of image scanning whereby the image data from a single image is scanned sequentially from top to bottom to create a single image.
The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be
scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh Rate
and is expressed in hertz (Hz).
An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTV
High-Definition Television.
An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and
computers connected to a TCP/IP Network.
An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by
computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal
source to sRGB.
This is a numerical value that defines the number of bits used for the network address on a divided network (subnet) from the IP address
A type of video signal with a resolution of 800 (horizontal) ^ 600 (vertical) dots that is used by IBM PC/AT-compatible computers.
A Video signal which has the luminance component and color component separated to provide better image quality.
Refers to images that consist of two independent signals: Y (luminance signal) and C (color signal).
A type of video signal with a resolution of 1,280 (horizontal) ^ 1,024 (vertical) dots that is used by IBM PC/AT-compatible computers.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are
not of a good quality. The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is
called Synchronization. If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are
not of a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking. If Tracking is
not carried out correctly, wide vertical stripes appear in the signal.
g
This is the IP Address for the destination computer used for error notification in SNMP.
A type of video signal with a resolution of 640 (horizontal) ^ 480 (vertical) dots that is used by IBM PC/AT-compatible computers.
A type of video signal with a resolution of 1,024 (horizontal) ^ 768 (vertical) dots that is used by IBM PC/AT-compatible computers.
103
g
g
.