Epson EB-Z8000WU User Manual page 63

Problem Solving
Check
Is the computer set for dual display?
Only when projecting computer images
Is the correct resolution selected?
Only when projecting computer images
Image colors are not right
Check
Do the input signal settings match the signals from the connected
device?
Is the image Brightness set correctly?
Are the cables connected correctly?
g
Is Contrast adjusted correctly?
Is the Color Adjustment correctly?
Are the Color Saturation and Tint adjusted correctly?
Only when projecting images from a video source
Images appear dark
Check
Is the image Brightness set correctly?
g
Is Contrast adjusted correctly?
Is the lamp due for replacement?
If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image
on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display
setting. s Computer video driver documentation
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.93
Change the following settings according to the signal for the connected equipment.
When image is from a device connected to the Computer or BNC input port s Signal menu - Input Signal
When image is from a device connected to the Video or S-Video input port s Signal menu - Video Signal
Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness
Check that all the cables required for projection are securely connected. s Quick Start Guide
Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast
Adjust the Color Adjustment setting from the configuration menu. s Image Menu - Color Adjustment
Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color Saturation,
Tint p.41
Adjust the Brightness and Power Consumption settings from the configuration menu.
s Image Menu - Brightness p.41 s Settings Menu - Power Consumption
Adjust the Contrast setting from the configuration menu.
s Image Menu - Contrast p.41
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes
poorer.When this happens, replace the lamp with a new lamp. s
Remedy
s Computer documentation
Remedy
Remedy
p.74
63
p.43
p.43
p.41
p.41
p.41
p.45