Epson EB-Z8000WU User Manual page 13

Part Names and Functions
Name
M
[Lens Shift] button Press to adjust the lens shift. s Quick Start Guide
N
Press to set the remote control ID. s
[ID] button
O
Displays and closes the Help screen which shows you
[Help] button
how to deal with problems if they occur. s
P
Remote port Connects the optional remote control cable set and
outputs signals from the remote control. When the
remote control cable is plugged into this remote port,
the remote receiver is disabled.
Q
Press to adjust the zoom. s Quick Start Guide
[Zoom] button
R
Use this button to enter passwords, IP address from the
[Num] button
Network, and so on. s
S
[Focus] button Press to adjust the focus. s Quick Start Guide
T
Numeric buttons Use this button to enter passwords, remote control IP
settings, IP address from the Network, and so on.
s p.31,
U
Each time the button is pressed, the Color Mode changes.
[Color Mode] button
p.20
s
V
[Freeze] button Images are paused or unpaused. s
W
[E-Zoom] buttons The [z] button enlarges the image without changing the
[z][x] projection size.
The [x] button reduces the parts of images that have
been enlarged using the [z] button. s
X
Press to activate the on screen pointer. s
[Pointer] button
Y
Stops the current function. If pressed when the
[ESC] button
configuration menu is displayed, it moves to the
previous menu level. s p.40,
Acts as a mouse's right button when using the optional
wireless mouse receiver.
Function
p.31
p.54
p.34
p.34
p.21
p.28
p.27
p.54
Name
Z
[User] button Press to assign a frequently used item from the six
available configuration menu items. By pressing the
button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch
settings/adjustments. s
Test Pattern is assigned as the default setting.
a
[LAN] button Does not function for this unit.
b
ID switch Use this switch to enable (On)/disable (Off) ID settings
for the remote control. s
c
Each time you press this button, the image on the screen
[DVI-D/HDMI] button
changes between the DVI-D and HDMI input ports.
p.19
s
d
[Search] button Changes to the next input source that is connected to
the projector and is sending an image. s
e
A light is emitted when outputting remote control signals.
Indicators
f
Outputs remote control signals.
Remote control
light-emitting area
13
Function
p.45
p.29
p.18