Directed Electronics SmartStart 5000-series Owner's Manual page 26

Note: If your installer is programming the system with the Bitwrit-
er,® the remote start run time may be programmed for any dura-
tion ranging from 1 to 60 minutes.
3, 6, 9, or 12 minute timer mode run time. Your system can be
•
programmed to allow the vehicle to run for 3, 6, 9, or 12 minutes
when remote started in timer mode. Can be set from 1 to 16
minutes by your installer.
• While the remote start is running the engine, the parking lights
Flash on and off, or Come on steadily.
• Comfort closure is a programming option which closes the ve-
hicle's windows after remote locking.
© 2010 Directed Electronics. All rights reserved. 23