Table of Contents
Advertisement
3
In the Overwrite drop-down menu, select
Auto (recommended), or select the desired
duration the hard drive should retain its
data.
NOTE: If overwrite recording is enabled, the
system's hard drive automatically
re-writes the hard drive's oldest
content (first in first out).
4
Click Apply to save your settings.
Formatting USB Flash Drives
ATTENTION: Formatting a USB flash
all data
drive erases
This step cannot be undone.
1
Insert a USB flash drive (not included) into
one of the USB ports.
2
In the main menu, click Device>HDD.
3
Click Format USB, then click OK. Wait for
formatting to complete.
on the drive.
System
The System tab allows you to
configure the system time
and user accounts.
• For instructions on how to set the system
time, including how to setup automatic
Daylight Savings Time adjustments or
NTP, see "Setting the Date and Time" on
page 20.
Changing Date Format
You can change the way the system
displays the time (i.e. Month, Day, Year)
To change the date format:
1
Select the General tab.
2
In the Date Format drop-down menu,
select the desired format. Choose from
MM/DD/YY (Month, Day, Year), YY/MM/DD
(Year, Month, Date), or DD/MM/YY (Day,
Month, Year).
3
Click Apply to save your settings.
Changing Time Format
You can change the way the system
displays the date and time format (i.e
6:00 pm or 18:00).
To change the time format:
1
Select the General tab.
2
In the Time Format drop-down menu,
select 12 Hour or 24 Hour.
3
Click Apply to save your settings.
Changing the System Language
1
In the Language drop-down menu, select
your desired system language.
2
Click Apply to save your settings.
3
Right-click until you exit the menu. Follow
the on-screen instructions to restart your
system.
Using the Main Menu
51
Hide quick links:
Advertisement
Table of Contents
