16-Channel - Lorex LH140 Instruction Manual

Appendix E: Replacing the Hard Drive
4 Connect the power and data cables.
5 Replace the side and cover panel screws.

16-Channel

Make sure that the power cable has been disconnected before changing the
hard drive.
1 Remove the screws from each side panel (x2) and rear panel (x4) of the cover.
2 Gently slide the cover away from the rear panel and lift off. Be careful of sharp edges.
3 Next, install the hard drive:
• If installing a 3.5" hard drive, remove the 4 screws holding the hard drive bracket and remove
the bracket from the DVR. Place the hard drive in the bracket and insert 4 screws to secure
the hard drive to the bracket. Place the hard drive and bracket back in the DVR with the power
and data connectors facing the middle and replace the hard drive bracket screws.
116
Remove hard drive bracket
Insert the hard drive screws
Replace hard drive bracket