Version Of The "Live Viewer" Software - Hitachi CP-X267 Network Manual

3.2 Install "Live Viewer 3" (continued)
8) The Hardware Installation dialog appears. Press Continue Anyway.
9) After a moment, installation will complete
and the Setup Complete dialog will appear
as shown on the right. Click [Finish]. This
completes the software installation. Then your
PC automatically restarts.
(1) To confirm that the software has been
properly installed, press [Start] button on
the toolbar, select All Programs and then
select the Projector Tools folder.
(2) The "Live Viewer 3" will appear in that
folder if the installation was successful.
3 .2 .3 Version of the "Live Viewer " software
To use the Live Mode, it is required to install the software, the "Live Viewer", into
the PC that is going to be connected to the projector through the network.
The right software version is depended on the models that you have. If the version
is not matched with the projector, the software will not work properly.
Live Viewer
Version
.0
2.1x
.0
3.xx
• "x" in the version means 0 or greater.
Please check and get the latest version at Hitachi Web site.
http://hitachi.us/digitalmedia or http://www.hitachidigitalmedia.com
CP-X268A
CP-X267
CP-X608
™
Í
Í
Í
3 . Using the Live Mode
Models
CPX2
Í Í
™ ™
™ ™
™ ™
CP-X308
CP-X417
CP-X807
Í
Í
Í
™
5