History Connection - Hitachi CP-X267 Network Manual

3 . Using the Live Mode
3.5 Manual configuration (continued)

3 .5 .2 History connection

The "Live Viewer 3" can memory the network
settings when connecting to the projector as
a history record. After that, selecting a history
record can quickly connect the network with the
projector.
1) Select [History].
2) Choose a history record listed in the window.
3) Click [Connect].
4) The network connection will be established.
Proceed to the item 3.6 Confirm the connection to your destination. (50)
If you want to copy a history record to a profile data, select one of the history
record and click [Register to profile]. The profile data cannot be erased
automatically.
NOTE
• The number of the history record is maximum 10 for each network
adapter. When the 11th data is stored, the oldest record among the 10 will be
overwritten.
• The data & time information in each history record is renewed when the
network is connected by using the history record.
• If the DHCP is set on in the projector, the network connection between the
projector and PC may not be established since IP address may be varied.
• Even if you use the profile connection, it will be memorized as a history
record.
4