Hitachi CP-X267 Network Manual page 36

3 . Using the Live Mode
3.4 Passcode connection (continued)
n A Network Configuration Conflict exists.
The message comes up when the network
connection mode you set in the PC does not
match with the mode of the projector.
Please verify your network configuration
setting on the projector and PC.
Click [Exit], then the "Live Viewer 3" main
menu is displayed even though the network
is not established. Click
to go back to the item 3.3.3 Connecting to
the network. (31)
n Are you sure you want to connect the selected projector?
The message is appeared when the wireless
adapter you selected is already used for
another network connection.
• To connect, click [Yes]. Proceed to the
3.6 Confirm the connection to your
destination. (50)
• Not to connect, click [No] then the "Live
Viewer 3" main menu is displayed even
though the network is not established. Click
on the main menu to go back to the item
3.3.3 Connecting to the network. (31)
36
on the main menu