1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X267
  6. Network manual

Hitachi CP-X267 Network Manual

Hitachi projector user's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
CP-X308
User's Manual (detailed)
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
ü Live Mode
This projector can project your PC images on screen through wireless or wired
network, which can erase a signal cable from your desk.
ü Quick connection to your network
No expert knowledge is required any more. Various options for network setting
give you a quick and simple connection to the network.
ü Web control
The projector can be controlled and monitored by a web browser software on
your PC, which can help you to setup and maintain the projector.
ü PC-LESS Presentation
This projector can project images stored in an SD memory or a USB memory
on screen, which allow you not to bring your PC with you.
This manual is only intended to explain Network functions only.
For safety, operations or any other issues, refer to the Safety Guide and User's
Manual (concise and detailed).
WARNING
product.
After reading them, store them in a safe place for future reference.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
►Before using this product, be sure to read all manuals for this


Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X267

Summary of Contents for Hitachi CP-X267

  • Page 1: About This Manual

    PC, which can help you to setup and maintain the projector. ü PC-LESS Presentation This projector can project images stored in an SD memory or a USB memory on screen, which allow you not to bring your PC with you.

  • Page 2: Table Of Contents

    4 . Management with Web browser software . . 64 4. Configuring and controlling the projector via a web browser . . 65 4.. Logon ....67 4.. Network Information .

  • Page 3: Caution

    SD card while being accessed. The storage media can be pulled out only while not being accessed. Perform the REMOVE MEDIA procedure or turn the projector off before pulling out the media. To perform the REMOVE MEDIA procedure, choose an suitable item among the REMOVE ALL, REMOVE SD CARD or REMOVE USB using the PC- LESS PRESENTATION menu under the MIU Menu.
  • Page 4 Caution 0560 The manufacturer (Gemtek) hereby declare that this equipment (the wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

  • Page 5: Main Functions

    LAN or wireless LAN connection. (20) Live Viewer 3 Fig. 1.1.a “Live Viewer 3” outlines (through wireless LAN connection) Fig. 1.1.b “Live Viewer 3” Main menu One projector can be connected with up to 4 PCs using “Live Viewer 3”. (54)

  • Page 6: Quick Connection To Your Network

    The Passcode is a code that includes SSID and IP address and other information that are required for the network connection. The Passcode is given on screen by the projector, and then all you need to do is to input the code to the “Live Viewer 3” in your PC. (26) Fig.1.2 PASSCODE on the projector screen...

  • Page 7: Configuring And Controlling Via A Web Browser

    1 . Main functions 1.3 Configuring and controlling via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to configure the network settings, monitor the projector and so on.

  • Page 8: Pc-Less Presentation

    • The supported formats are FAT 12, FAT 16(FAT) and FAT 32. NTFS is not supported. • USB hub is not supported. Fig. 1.4 “PC-LESS Presentation” outlines “PC-LESS Presentation” can be controlled via keypad on the projector or remote control (101).
  • Page 9 1.4 PC-LESS Presentation (Display the images stored in SD memory card/USB memory.) (continued) NOTE • There are several naming limitations for the folders and files. (1) Alphanumeric and Japanese characters are supported if the language setting is Japanese. (2) Alphanumeric and Latin-1 characters are supported if the language setting is NOT Japanese.

  • Page 10: Equipment Connection And Network Setting

    *3: Depending on the type of wireless network device and PC you are using, the projector may not be able to communicate properly with your PC, even if the PC you are using is equipped with built-in wireless LAN function.

  • Page 11: Manual Network Connection Setting - Wired Lan

    This section explains how to set it up manually. 2 .3 .1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator. Next, please check the PC setting as explained below.
  • Page 12 2 . Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 5) Open “Local Area Connection Properties” window you use for network device. (Fig. 2.3.2.c) Fig. 2.3.2.c “Local Area Connection Properties” window 6) Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties” window.
  • Page 13 The Network address portion included in the IP address set into your PC should be common with projector’s one. And the entire IP address in the PC should not be overlapped with other equipments in the same network, including the projector.

  • Page 14: Internet Option" Setting

    2 . Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2 .3 .3 “Internet Option” setting 1) Click “Internet Options” in “Network and Internet Connections” window (Fig. 2.3.3.a) to open “Internet Properties” window. (Fig.2.3.3.b) Fig.

  • Page 15: Check Connection

    3) Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.3.3.c) 2 .3 .4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not.

  • Page 16: Manual Network Connection Setting -Wireless Lan

    2 . Equipment connection and network setting 2 .4 Manual network connection setting –Wireless LAN The projector and PC can communicate in both of Ad-Hoc and Infrastructure modes, using the designated wireless network card on the projector. This section is intended to explain how to set up wireless LAN connection manually.

  • Page 17: Wireless Lan Connection Set Up

    * You can change these settings as you want via a web browser on your PC or the menu on the projector. Refer to the item 4.1.3 Network Settings (69) or  MIU Menu in the User's Manual (detailed) – Operating Guide.
  • Page 18 2 . Equipment connection and network setting 2.4 Manual network connection setting –Wireless LAN (continued) 3) Set used protocol as “TCP/IP” and open TCP/IP property. Set IP address and other settings as same as wired LAN connection set up. (12) 4) Open “Wireless Networks”...
  • Page 19 Data encryption: not enabled (Default setting is not enabled.) NOTE • If the default setting in the projector is used, set the data as above into your PC. If an access point is used or any encryption mode is used, it is required to set the data that is matched to your system.

  • Page 20: Using The Live Mode

    3 . Using the Live Mode 3. Using the Live Mode The section is intended to explain the process to use the projector in the Live Mode. The outline of the process is as follows. 1) Install the “Live Viewer 3” (23) 2) Quick Connection to the network (26)

  • Page 21: Outline Of The Live Mode

    2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a PC, so that the projector can displays images sent by up to 4 PCs at the same time.

  • Page 22: Presenter Mode

    3.1 Outline of the Live Mode (continued) 3 .1 .2 Presenter mode In the Single PC mode, the projector can be occupied by one PC and can block an access from any other PC, if the Presenter mode is set to on in the “Live Viewer 3”.

  • Page 23: Minimum Pc Hardware And Software Requirement

    • Display: NOTE • For Windows VISTA, use the latest “Live Viewer 3”. Please get the latest version at Hitachi WEB site (http://hitachi.us/digitalmedia or http://www. hitachidigitalmedia.com). Since some functions maybe limited, please see the instruction manual that is supplied with the latest “Live Viewer 3”.

  • Page 24: Software Installation Procedure

    6) The Choose Destination Location dialog appears. Press [Next]. NOTE • The C:\Program Files\Projector Tools\LiveViewer3 folder will be created and the program will be installed into that folder. If you wish to install to a different folder, click [Browse] and select another folder.

  • Page 25: Version Of The "Live Viewer" Software

    Live Viewer Version .0 2.1x .0 3.xx • “x” in the version means 0 or greater. Please check and get the latest version at Hitachi Web site. http://hitachi.us/digitalmedia or http://www.hitachidigitalmedia.com CP-X268A CP-X267 CP-X608 ™ Í Í...

  • Page 26: Quick Connection To The Network

    Start the “Live Viewer 3” in your PC, taking one of the followings. 1) Double click the “Live Viewer 3” icon on the Desktop in your PC 2) Select “Start” → “All Programs” → “Projector Tools” → “Live Viewer 3” on Windows XP menu.

  • Page 27: Selecting The Network Connection Mode

    3.3 Quick connection to the network (continued) 3 .3 .2 Selecting the network connection mode After starting the “Live Viewer 3”, the “Select the Network Connection” screen comes up. Select the network connection that you would like to use. There are 3 options in the menu. •...
  • Page 28 A network connection was not established. The screen is displayed in the case that the projector is not connected with a LAN cable to your PC when the wired LAN is selected. Be sure that the projector is connected with a LAN cable to your PC.
  • Page 29 PC may not be established since IP address may be varied. If you like to use the My Connection, set the DHCP off in the projector. • If no profile data is assigned to the My Connection, it can’t be used.
  • Page 30 3 . Using the Live Mode 3.3 Quick connection to the network (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection.

  • Page 31: Connecting To The Network

    If you want to use the Passcode for network connection, select [Enter PassCode] and click [NEXT]. The Passcode is given by the projector on screen. And you simply input the Passcode to the “Live Viewer 3” to connect the network.

  • Page 32: Passcord Connection

    The Passcode is a code that expresses the network setting in the projector. If you input the code in the “Live Viewer 3” in your PC, the network setting in the projector and PC can be matched and the connection will be established immediately.
  • Page 33 3.4 Passcode connection (continued) Method 2 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on the projector to show the menu on screen.

  • Page 34: Entering The Passcode

    If the manual setting screen is displayed, please follow the item 3.4.3. [trouble shooting] n Incorrect PassCode. The incorrect Passcode was input. Click [Back] to return to the “Please enter the PassCode” screen. Check the PassCode on the projector screen (32) and enter the code again.
  • Page 35 NOTE • If the IP address you input to the PC is the same as the one set in the projector, a warning message will come up. Please choose an IP address that is currently not in use. on the main and...
  • Page 36 Click to go back to the item 3.3.3 Connecting to the network. (31) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection.

  • Page 37: Configuring Manually

    Proceed to the item 3.6 Confirm the connection to your destination. (50) *1 To find the network setting on the projector, refer to the NOTE. (40) *2 If you don’t use the factory default SSID, you need to set your SSID by either entering manually or selecting from the list of detected SSID.
  • Page 38 The encryption key is always shown as “ ********** ”. *3 To find the network setting on the projector, refer to the NOTE. (40) *4 If you use Subnet mask except Class A/B/C, please set it.
  • Page 39 Proceed to the item 3.6 Confirm the connection to your destination. (50) *1 To find the network setting on the projector, refer to the NOTE. (40) *2 If you don’t use the factory default SSID, you need to set your SSID by either entering manually or selecting from the list of detected SSID.
  • Page 40 • If you require the network setting information on the projector, take the following procedure to find it out. 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on the projector to show the menu on screen.

  • Page 41: Manual Configuration

    4) The setting information of the selected profile data is shown. • If the DHCP is set on in the projector, the network connection between the projector and PC may not be established since IP address may be varied. If you like to use the Profile connection, set the DHCP off in the projector.

  • Page 42: History Connection

    • The data & time information in each history record is renewed when the network is connected by using the history record. • If the DHCP is set on in the projector, the network connection between the projector and PC may not be established since IP address may be varied.

  • Page 43: Configuring Manually

    The required information depends on how you connect the projector and PC. • Direct connection between the projector and PC (AdHoc mode). (44) • The projector connected to an access point by a LAN cable. (45) • The projector connected to an access point by the wireless LAN. (46) Wired LAN If you use the wired LAN, go to (47).
  • Page 44 Proceed to the item 3.6 Confirm the connection to your destination. (50) *1 To find the network setting on the projector, refer to the NOTE. (40) *2 If you use an encryption, you need to set it. Contact the network administrator to find the encryption key that is set in the projector.
  • Page 45 The encryption key is always shown as “ ********** ”. *3 To find the network setting on the projector, refer to the NOTE. (40) 3 . Using the Live Mode...
  • Page 46 *2 If you use an encryption, you need to set it. Contact the network administrator to check the encryption key that is set in the projector. The encryption key is always shown as “ ********** ”. *3 To find the network setting on the projector, refer to the NOTE. (40)
  • Page 47 3) The network connection will be established. Proceed to the item 3.6 Confirm the connection to your destination. (50) *1 To find the network setting on the projector, refer to the NOTE. (40) [trouble shooting] n A network connection could not be established.
  • Page 48 NOTE • If the IP address you input to the PC is the same as the one set in the projector, a warning message will come up. Please choose an IP address that is currently not in use. n A Network Configuration Conflict exists.
  • Page 49 3.5 Manual configuration (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the connection to your...

  • Page 50: Confirm The Connection To Your Destination

    IP address shown in the screen. • To send images to the projector, click [Yes]. The transmission will be started. It is required to set the MIU as an input port and select the Live Mode in the MIU Menu in the projector, to display the transmitted images.
  • Page 51 3.6 Confirm the connection to your destination (continued) n A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slide show mode in the PC-LESS Presentation.

  • Page 52: Connection Error

    (31) NOTE • If you selected the My Connection, the “Live Viewer 3” is closed. Check the network setting in the projector, and retry the connection from the item 3.3 Quick connection to the network. (26) [trouble shooting] n The network connection is refused.

  • Page 53: Setting The Live Mode

    OSD menu, by using the remote control or keypad on the projector. 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on the projector to show the menu on screen.

  • Page 54: Start The "Live Viewer 3

    3 . Using the Live Mode 3 .7 Start the “Live Viewer 3” When you get the connection between your projector and PC, the “Live Viewer 3” main menu will be shown on the PC screen. On the main menu you can configure the settings and operate the functions to send your images to the projector in the Live Mode.
  • Page 55 The last image before the button is clicked is remained on screen. You can revise the image data on your PC without showing it on the projector’s screen. r Display mode button (57) The button switches the Single PC mode and Multi PC mode.

  • Page 56: Displaying The Status

    Four PCs are on screen. NOTE • The status display is refreshed in every 3 seconds. • If the status cannot be gotten from the projector, it will not be displayed. Status The network connection to the projector is not established yet.

  • Page 57: Switching The Display Mode

    • The image transmission will be stopped, when you click the Single mode button while the projector is in the Single PC mode or you click one of the Multi mode buttons that shows the quarter screen which is currently displaying your PC images in the Multi PC mode.

  • Page 58: Option Menu

    If a mouse cursor (pointer) on your PC screen is not displayed on the projector screen, check in the box. The “Live Viewer3” helps you to find the cursor on the screen. If the cursor is on the projector screen, not check it.
  • Page 59 3.7 Start the “Live Viewer 3” (continued) e Presenter Mode In the Single PC mode, the projector can be occupied by one PC and can block an access from any other PC, if the Presenter mode is set to on in the “Live Viewer 3”.

  • Page 60: Profile Data

    • When you make a new profile data, it is strongly recommended to check that the new dada can work properly by selecting the data at the Profile connection. (41) • If you change a wireless network adapter on the projector or PC, make a new profile data for the adapter.

  • Page 61: Editing Profile Data

    3.8 Profile data (continued) 3.8.3 Editing Profile data If necessary, the profile data can be edited on the Manual Configuration screen. (41) 1) Select [Profile], and select one of the data listed in the window. 2) Click [Edit]. 3) The “Edit profile” screen will come up. 4) Edit the information required to be revised.

  • Page 62: Registering My Connection

    3 . Using the Live Mode 3.8 Profile data (continued) 3 .8 .4 Registering My Connection One of the profile data, which is often used, can be registered as the My Connection profile data. Once the data is registered, all you need to do is to select the My Connection to connect to the network.
  • Page 63 Also, you can register a profile data to My Connection, when the network connection is established. When it is established, the “Connection to Projector successful” screen is displayed. (50) If you wish to use the current connection setting for My Connection, check in the box for [Register this setting to My Connection].

  • Page 64: Management With Web Browser Software

    Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (67)

  • Page 65: Configuring And Controlling The Projector Via A Web Browser

    4.1 Configuring and controlling the projector via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. NOTE • Internet Explorer 5.5 or later is required.
  • Page 66 4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator ID and User ID.

  • Page 67: Logon

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .1 Logon Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/”...

  • Page 68: Network Information

    4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .2 Network Information Displays the projector’s current network configuration settings. Item Projector Name DHCP IP Address Subnet Mask Default Gateway...

  • Page 69: Network Settings

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .3 Network Settings Displays and configures network settings. Item Network Mode IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP)
  • Page 70 You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. • The WEP Key, WPA passphrase and SSID settings will not be set if the invalid characters are used.

  • Page 71: Port Settings

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .4 Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:9715) Port open Authentication SNMP Port Port open...

  • Page 72: Mail Settings

    • You can confirm whether the mail settings work correctly using [Send Test Mail] button. Please enable Send mail setting before clicking [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. Description Click [Enable] check box to use the e-mail function.

  • Page 73: Alert Settings

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .6 Alert Settings Displays and configures failure & alert settings. Alert Item Cover Error Fan Error Lamp Error Temp Error Air Flow Error Lamp Time Error Cold Error...
  • Page 74 MESSAGE setting in the SERVICE item of the OPTION menu which defines the period until the filter message is displayed on the projector screen. The e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500, 600, 700 or 800 hours based on the configuration.

  • Page 75: Schedule Settings

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .7 Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date No.2 Specific date No.3 Specific date No.4 Specific date No.5...
  • Page 76 4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) The daily and weekly event items are shown below. Item Schedule Schedule List The specific date event items are shown below. Item...

  • Page 77: Date/Time Settings

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month Week hour Time minute Month Week...
  • Page 78 • To enable the SNTP function, the time difference must be set. • The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled. • The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

  • Page 79: Security Settings

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .9 Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Re-enter Administrator Password User authority User ID User Password...
  • Page 80 4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community name User Password Re-enter Password Click [Apply] button to save the settings.

  • Page 81: Projector Control

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .10 Projector Control NOTE • The setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button.
  • Page 82 4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR Color Space...
  • Page 83 4.1 Configuring and controlling the projector via a web browser (Continued) Item Volume Speaker Audio-Computer1 Audio-Computer2 Audio-Video Audio-S-Video Audio-Component Audio-MIU Screen Language Menu Position V Menu Position H Blank Startup MyScreen Lock Message Option Auto Search Auto Keystone Auto on...
  • Page 84 4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) The Service item in the Projector Control menu is shown only when you logon with the Administrator ID. The items shown in the table below can be performed using the Projector Control menu.

  • Page 85: Remote Control

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .11 Remote Control The functions on the bundled remote control are assigned to the Web Remote Control screen. Item POWER COMPUTER VIDEO BLANK FREEZE MUTE MENU DOWN...
  • Page 86 4 . Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) The functions on PC-LESS PRESENTATION menu are assigned to the Web Remote Control screen. Item LIVE MODE THUMBNAIL SLIDE SHOW DIRECTORY NOTE •...

  • Page 87: Projector Status

    4.1 Configuring and controlling the projector via a web browser (Continued) 4 .1 .12 Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze 4 . Management with Web browser software...

  • Page 88: Network Restart

    NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Wait 10 seconds or more after clicking [Restart] button to log on again. • The Logon menu (67) is displayed after restarting the projector’s network connection if the DHCP is set to ON.

  • Page 89: E-Mail Alerts

    NOTE • Up to five e-mail addresses can be specified. • The projector may be not able to send e-mail if the projector suddenly loses power. Mail Settings (72) To use the projector’s e-mail alert function, please configure the following items through a web browser.
  • Page 90 10) Click [Apply] button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : <Mail title> Text : <Mail text> Date Time IP Address MAC Address <Projector name> <Failure/Warning date> <Failure/Warning time> <Projector IP address> <Projector MAC address>...

  • Page 91: Projector Management Using Snmp

    4 .3 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.

  • Page 92: Event Scheduling

    4 . Management with Web browser software 4 .4 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display.
  • Page 93 • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not work when the power switch is turned off, [O] or the breaker in a room is tripped.
  • Page 94 Date/Time Settings (77) The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser. Enter the Administrator ID and Password and click [Logon].

  • Page 95: E-Shot (Still Image Transfer) Display

    4 .5 e-SHOT (Still Image Transfer) Display The projector can display a still image in an SD memory card or USB memory that is transferred via the network. (Fig. 4.5) e-SHOT transmission requires an exclusive application for your PC. You can download it from the Hitachi web site (http://hitachi.us/digitalmedia or http://www.

  • Page 96: Command Control Via The Network

    4 . Management with Web browser software 4 .6 Command Control via the Network You can configure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings (71)
  • Page 97 4.6 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. (79) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See NOTE. 9) Click [Apply] button to save the settings.

  • Page 98: Command Format

    4 . Management with Web browser software 4.6 Command Control via the Network (Continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However, the following reply will be sent back in the event of authentication failure when authentication is enabled.
  • Page 99 <NAK reply> Connection Reply 0x15  byte <Error reply> Reply Error code 0x1C <Data reply> Reply 0x1D <Projector busy reply> Reply Status code 0x1F <Authentication error reply> Authentication Reply Error code 0x1F 0x04 4 . Management with Web browser software Connection...
  • Page 100 The projector uses a challenge response type authentication with an MD5 (Message Digest 5) algorithm. When the projector is using a LAN, a random 8 bytes will be returned if authentication is enabled. Bind this received 8 bytes and the Authentication Password and digest this data with the MD5 algorithm and add this in front of the commands to send.

  • Page 101: Pc-Less Presentation

    CARD slot or USB STORAGE port and displays the image on the following modes. The PC-LESS Presentation can be operated on the OSD menu in the projector screen or via a web browser software in your PC connected to the projector through the network.
  • Page 102 5 . PC-LESS Presentation 5.1 Outline of the PC-LESS Presentation (continued) Directory Tree Mode [Supported storage media] • SD memory card • USB memory (USB memory type, USB hard disk and USB card reader type) NOTE • USB memory reader (adapter) that has more than 1 USB slot is not supported (if the adapter is acknowledged as multiple devices connected).

  • Page 103: Thumbnail Mode

    1) Save JEPG or other supported files (102) into root directory in a SD or USB storage media. 2) Insert the SD memory card into the SD card slot on the projector or the USB memory into the USB STORAGE port on the projector. ( Using a USB storage/Using an SD card in the User’s Manual (concise))
  • Page 104 1) Save JEPG or other supported files (102) into root directory in a SD or USB storage media. 2) Insert the SD memory card into the SD card slot on the projector or the USB memory into the USB STORAGE port on the projector. ( Using a USB storage/Using an SD card in the User’s Manual (concise))

  • Page 105: Operating By Buttons Or Keys

    ENTER INPUT MENU * These operations are not accessible while the projector OSD menu is displayed. NOTE • The Thumbnail mode shows 12 pictures in 1 page as maximum. • It is not possible to change the input port by INPUT button when THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.

  • Page 106: Operation On The Thumbnail Menu

    To initialize it, push the ENTER on the remote control or Web Remote Control, or INPUT on the projector. To escape to the Thumbnail menu, push the ESC on the remote control or the ◄ key on the projector or the LEFT button on the Web Remote Control. NOTE •...

  • Page 107: Full Screen Mode

    ENTER INPUT MENU *1) These operations are not accessible while the projector OSD menu is displayed. *2) The function for the pair of keys is selected on the KEY CONFIG. menu (108) NOTE • It is not possible to change the input port by INPUT button of keypad when displaying the THUMBNAIL, SLIDE SHOW, or DIRECTORY.
  • Page 108 5 . PC-LESS Presentation 5.3 Full Screen Mode (continued) You can display the image file with your desired size. 1) Select the DISPLAY SIZE in PC-LESS PRESENTATION menu. 2) Press the ENTER button on the remote control or ► button on the Keypad or RIGHT button on the Web Remote Control.

  • Page 109: Slide Show Mode

    ENTER INPUT MENU * These operations are not accessible while the projector OSD menu is displayed. NOTE • It is impossible to change the input port by the INPUT button if the THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
  • Page 110 5 . PC-LESS Presentation 5.4 Slide Show Mode (continued) You can play the Slide show at your desired configuration. Configure the SLIDE SHOW items in THUMBNAIL. 1) START # : Set the beginning number of the Slide show. 2) STOP # : Set the end number of the Slide show.

  • Page 111: Directory Tree View

    5 .5 Directory Tree View You can display the directory with the projector menu. Select the DIRECTORY on the PC-LESS PRESENTATION menu. And press the ENTER / ► button on the remote control or ► button on Keypad. Then directory will be displayed.
  • Page 112 PAGE DOWN ENTER INPUT MENU * These operations are not accessible while projector OSD menu is displayed. NOTE • It is not possible to change the input port by INPUT button when THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed. • Display the projector OSD menu before changing the input port .
  • Page 113 5.5 Directory Tree View (continued) [File information display] In the Directory Tree View screen, the following information is shown as the File information. Picture file (still picture) - File format (“JPEG Image”, “PNG Image” or “BMP Image”) - Time stamp (When file is created) - File size (Size of File) - Image size (File resolution) Movie file (motion picture)

  • Page 114: Pc-Less Presentation" Error Message

    5 . PC-LESS Presentation 5 .6 “PC-LESS Presentation” error message Error message is displayed at a specific condition while “PC-LESS Presentation” mode. It appears at the bottom and the gray area of screen. Fig. 5.6 “PC-LESS Presentation” error message “PC-LESS Presentation” error message list Error message File is not found.
  • Page 115 5 .7 Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files or moving image files in the thumbnail or the slide show. The playlist file name is “imagelistdir.txt”. It is created in each folder when the PC-LESS Presentation is displayed.
  • Page 116 STANDBY power mode and then turn it on again, the new settings might not take effect. • Bring the PC and projector closer together • Radio waves won’t go through concrete and metal (steel doors, etc.)
  • Page 117 The wireless network card is inserted into the projector. Communication between the projector and PC is not working well. MIU Functions of the projector is not working well. * User’s Manual (detailed) - Operating Guide 6 .

  • Page 118: Specifications

    7. Specifications 7. Specifications Item File format Control software Corresponding protocol Network Security PC application operational environment SD Memory Card Wireless network card Specifications JPEG, PNG, Bitmap and MPEG4 Dedicated PC application and Web browser TCP/IP, DHCP client and HTTP server Wireless LAN (IEEE802.11b/g) (Ad-Hoc and Infrastructure modes) Ethernet (100Base-TX/10Base-T)

  • Page 119: Warranty And After-Sales Service

    8 . Warranty and after-sales service 8. Warranty and after-sales service If a problem occurs with the equipment, please read “6. Troubleshooting” (116) section first and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell you what warranty condition is applied.

This manual is also suitable for:

Cp-x308

Table of Contents