Entering The Passcode - Hitachi CP-X267 Network Manual

3 . Using the Live Mode
3.4 Passcode connection (continued)

3 .4 .2 Entering the Passcode

If you select [Enter PassCode] at the item
3.3.3, the "Please enter the PassCode" screen
is displayed. Please enter the Passcode
divided 4-digit each in 3 boxes (total 12-digit).
Example PASSCODE: 1234 – 5678 - 9ABC
After entering the Passcode, click [Connect] to start the connection to the
projector.
Proceed to the item 3.6 Confirm the connection to your destination. (50)
If you click [Back], the screen is back to the item 3.3.3 Connecting to the network.
(31)
NOTE
• When entering the Passcode, capital and small letters are not
distinguished.
• If you are using any encryption code or your unique SSID or Subnet mask
excluding ClassA and B and C, it is required to set the connection manually.
If the manual setting screen is displayed, please follow the item 3.4.3.
[trouble shooting]
n Incorrect PassCode.
The incorrect Passcode was input.
Click [Back] to return to the "Please enter
the PassCode" screen.
Check the PassCode on the projector
screen (32) and enter the code again.
34