Configuring Manually - Hitachi CP-X267 Network Manual

3.5 Manual configuration (continued)

3.5.3 Configuring manually

All setting for the network connection between
the projector and PC is input manually.
Select [Configure Network Settings
Manually].
The information to be input manually is different, depending on how you want to
connect the projector and PC.
Wireless LAN
The required information depends on how you connect the projector and PC.
• Direct connection between the projector and PC (AdHoc mode). (44)
• The projector connected to an access point by a LAN cable. (45)
• The projector connected to an access point by the wireless LAN. (46)
Wired LAN
If you use the wired LAN, go to (47).
3 . Using the Live Mode
43