Configure Port Roles; Configure Zones - ZyXEL Communications ZyWALL USG Series User Manual

2.2.2 Configure Port Roles

Here is how to take the P5 port from the lan2 interface and add it to the dmz interface.
Click Configuration > Network > Interface > Port Role.
1
Under P5 select the dmz (DMZ) radio button and click Apply.
2

2.2.3 Configure Zones

In this example you have created a WIZ_VPN tunnel through the Quick Setup - VPN Setup
wizard. By default, it is assigned to the IPSec_VPN zone. Do the following to move WIZ_VPN
from the IPSec_VPN zone to a new zone.
Click Configuration > Network > Zone and then double-click the IPSec_VPN entry.
1
Select WIZ_VPN and remove it from the Member box and click OK.
2
ZyWALL USG 20-2000 User's Guide
Chapter 2 How to Set Up Your Network
31