Set Up A Firewall Rule - ZyXEL Communications ZyWALL USG Series User Manual

5.6.2 Set Up a Firewall Rule

Create a firewall rule to allow the public to send HTTP traffic to IP address 1.1.1.1 in order to access
the HTTP server. If a domain name is registered for IP address 1.1.1.1, users can just go to the
domain name to access the web server.
Click Configuration > Firewall > Add. Set the From field as WAN and the To field as DMZ. Set
the Destination to the HTTP server's DMZ IP address object (DMZ_HTTP). DMZ_HTTP is the
destination because the ZyWALL applies NAT to traffic before applying the firewall rule. Set the
Access field to allow and the Service to HTTP, and click OK.
ZyWALL USG 20-2000 User's Guide
Chapter 5 Managing Traffic
113