Configuration Menu - ZyXEL Communications ZyWALL USG Series User Manual

Chapter 1 Introduction

Configuration Menu

Use the configuration menu screens to configure the ZyWALL's features.
Table 5 Configuration Menu Screens Summary
FOLDER OR LINK TAB
Quick Setup
Licensing
Registration
Signature
Update
Network
Interface
Routing
Zone
DDNS
NAT
HTTP Redirect
ALG
IP/MAC
Binding
DNS Inbound
LB
Auth. Policy
Firewall
14
FUNCTION
Quickly configure WAN interfaces or VPN connections.
Registration Register the device and activate trial services.
Service View the licensed service status and upgrade licensed services.
Anti-Virus Update anti-virus signatures immediately or by a schedule.
IDP/AppPatrol Update IDP signatures immediately or by a schedule.
System Protect View system-protect signatures status.
Port Grouping Configure physical port groups.
Port Role Use this screen to set the ZyWALL's flexible ports as LAN1, WLAN,
or DMZ.
Ethernet Manage Ethernet interfaces and virtual Ethernet interfaces.
PPP Create and manage PPPoE and PPTP interfaces.
Cellular Configure a cellular Internet connection for an installed 3G card.
Tunnel Configure tunneling between IPv4 and IPv6 networks.
WLAN Configure settings for an installed wireless LAN card.
VLAN Create and manage VLAN interfaces and virtual VLAN interfaces.
Bridge Create and manage bridges and virtual bridge interfaces.
Auxiliary Manage the AUX port.
Trunk Create and manage trunks (groups of interfaces) for load balancing
and link High Availability (HA).
Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
RIP Configure device-level RIP settings.
OSPF Configure device-level OSPF settings, including areas and virtual
links.
Configure zones used to define various policies.
Profile Define and manage the ZyWALL's DDNS domain names.
Set up and manage port forwarding rules.
Set up and manage HTTP redirection rules.
Configure SIP, H.323, and FTP pass-through settings.
Summary Configure IP to MAC address bindings for devices connected to
each supported interface.
Exempt List Configure ranges of IP addresses to which the ZyWALL does not
apply IP/MAC binding.
DNS Load Configure DNS Load Balancing.
Balancing
Define rules to force user authentication.
Firewall Create and manage level-3 traffic rules.
Session Limit Limit the number of concurrent client NAT/firewall sessions.
ZyWALL USG 20-2000 User's Guide