How To Save System Logs To A Usb Storage Device - ZyXEL Communications ZyWALL USG Series User Manual

Connect the power cord to the new ZyWALL power module.
8
Reconnect the power cord to the power outlet.
9
10 Push the ZyWALL power module switch to the on position.

6.8 How to Save System Logs to a USB Storage Device

The ZyWALL uses the memory space to store system logs. Once the memory is full, the ZyWALL
has new logs override old logs. If your ZyWALL's memory is full or the size of the system logs you
want to save may exceed the remaining space, you can use a USB storage device. This tutorial
shows you how to save the ZyWALL's system logs to a USB storage device directly connected to the
ZyWALL.
Note: You can check the remaining memory space in the Dashboard screen.
Note: System logs saved on the ZyWALL cannot be transferred to a USB device directly
connected to the ZyWALL. The ZyWALL saves new system logs to the connected
USB storage after you complete the settings shown here.
Insert a USB storage device to any USB port on your ZyWALL. In the Monitor > System Status >
1
USB Storage screen, you can see the USB device's information.
Note: Make sure the USB device's file system is supported by the ZyWALL. (It should not
display "Unknown".)
ZyWALL USG 20-2000 User's Guide
Chapter 6 Maintenance
135