Anti-Virus Policy Configuration - ZyXEL Communications ZyWALL USG Series User Manual

Chapter 3 Protecting Your Network

3.5 Anti-Virus Policy Configuration

This tutorial shows you how to configure an Anti-Virus policy.
Note: You need to first activate your Anti-Virus service license or trial. See
Service Registration on page
Click Configuration > Anti-X > Anti-Virus to display the Anti-Virus General screen. In the
1
Policies section click Add to display the Add Rule screen. Select Enable. In the Direction
section, you can select the From and To zones for traffic to scan for viruses. You can also select
traffic types to scan for viruses under Protocols to Scan. Click OK.
56
55.
Device and
ZyWALL USG 20-2000 User's Guide