Os Faq; How Do I Access The P-660R-Tx V3 Command Line Interface (Cli); How Do I Update The Firmware And Configuration File - ZyXEL Communications P-660R-Tx v3 Series Support Notes

Hide thumbs Also See for P-660R-Tx v3 Series:

Table of Contents

OS FAQ

The Command Line Interface is for the Administrator use only, and it could be

accessed via telnet session.

Begin telnet session:

(1) Choose "start" on your computer →"run"

(2) Input "cmd" and enter

(3) Input "telnet xxx.xxx.xxx.xxx" ( note that there is a space between the two),

(4) Enter to login in the CLI.

Note: It is protected by super password, „1234‟ by factory default.

You can do this if you access the P-660R-Tx v3 as Administrator. You can

upload the firmware and configuration file to P-660R-Tx v3 from Web

Condigurator, or using FTP software. You CAN NOT upload the firmware and

configuration file via Telnet because the Telnet connection will be dropped

during uploading the firmware. Please do not power off the router right after the

FTP uploading is finished, the router will upload the firmware to its flash at this

moment.

(1) Update on web configuration page, Advanced Setup，

Maintenance -> Firmware

You can check your current firmware version and upgrade the firmware of

the Router in this page. Make sure the firmware you want to use is on the

local hard drive of the computer. Click on Browse to browse the local hard

drive and locate the firmware to be used for upgrade.

(2) Update firmware with FTP

a) Use the FTP client program in your PC to login to your P-660R-Tx v3.

Note that it is protected by user name and password, "admin" and

"1234" by default.

b) To update firmware, you need to use the command: put xx.bin ras for

firmware or put xx.rom rom-0 for rom file.

xx.bin means the firmware on your local hard drive and xx.rom means

rom file on your local hard drive. You can simply draw them into the

window.

Note: There may be firmware that could not be upgraded from Web

Configurator. In this case, ZyXEL will prepare special Upload Software

P-660R-Tx v3 Series Support Notes

Table of Contents