Table of Contents
Advertisement
P-660R-Tx v3 Series Support Notes
How does the IPPR work?
18.
A policy defines the matching criteria and the action to take when a packet
meets the criteria. The action is taken only when all the criteria are met. The
criteria include the source address and port, IP protocol (ICMP, UDP, TCP,
etc), destination address and port, TOS and precedence (fields in the IP
header) and length. The inclusion of length criterion is to differentiate between
interactive and bulk traffic. Interactive applications, e.g., Telnet, tend to have
short packets, while bulk traffic, e.g., file transfer, tends to have large packets.
The actions that can be taken include routing the packet to a different gateway
(and hence the outgoing interface) and the TOS and precedence fields in the
IP header. IPPR follows the existing packet filtering facility of ZyNOS in style
and in implementation. The policies are divided into sets, where related
policies are grouped together. A use defines the policies before applying them
to an interface or a remote node, in the same fashion as the filters. There are
12 policy sets with 6 policies in each set.
?
19. What is CWMP
P660R Tx V3 supports TR-069 Amendment 1 (CPE WAN Management
Protocol Release 2.0) and TR-069 Amendment 2 (CPE WAN Management
Protocol v1.1, Release 3.0).
TR-069 is a protocol that defines how your ZyXEL Device (ZD) can be
managed via a management server (MS) such as ZyXEL‟s Vantage Access.
An administrator can use a management server to remotely set up the ZyXEL
device, modify settings, perform firmware upgrades as well as monitor and
diagnose the ZyXEL device. All you have to do is enable the device to be
managed by a management server and specify the management server IP
address or domain name and username and password.
?
20. How to configure CWMP on P660R TX v3
You can set CWMP on the Web configuration page: Access Management ->
CWMP -> CWMP Setup:
18
All contents copyright © 2008 ZyXEL Communications Corporation.
Advertisement
Table of Contents
