Armrest Height Adjustment; Armrest Angle Adjustment; Controller Position; Foot Platform Height Adjustment - Pride Mobility Jazzy 1113 Owner's Manual

Jazzy 1113 with ats
Hide thumbs Also See for Jazzy 1113:
Table of Contents

Advertisement

V .
C O M F O R T
NOTE: Changing the armrest width may increase the overall
width of your power chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of the armrest re-
ceiver bracket. See figure 23.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.

Armrest Height Adjustment

To change the armrest height:
1. Loosen the two setscrews located on the armrest receiver. See
figure 23.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrews to secure the armrest.

Armrest Angle Adjustment

To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to the floor.
2. Loosen the jam nut. See figure 23.
3. Turn the adjustment screw clockwise to raise the front of the arm-
rest, or turn the adjustment screw counterclockwise to lower the
front of the armrest.
5. Tighten the jam nut to lock the adjustment screw into place.

Controller Position

You can position the controller for either left-hand or right-hand use.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller connector(s) from the power base.
3. Cut any wire ties that attach the controller cable to the armrest.
4. Flip up the armrest and loosen the setscrew. See figure 24.
5. Slide the controller out of the armrest and place it in the other
armrest.
6. Tighten the setscrew.
7. Use a wire tie to secure the controller harness to the armrest.
8. Plug the controller connector(s) into the power base.

Foot Platform Height Adjustment

The foot platform height is easily adjusted to different heights in 1/
2-in. increments.
To raise or lower the foot platform:
1. Remove the hardware from the foot platform bracket. See figure 25.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the hardware into the foot platform bracket and tighten.
Jazzy 1113 ATS
A D J U S T M E N T S
Figure 24. Underside of Armrest
Figure 25. Foot Platform Height Adjustment
Figure 26. Foot Platform Angle Adjustment
www.pridemobility.com
SETSCREW
FOOT PLATFORM BRACKET
SETSCREW
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jazzy 1113 ats

Table of Contents