Heavy Duty Drop-In Leg Rests (Optional); To Adjust The Forward/Back Position; To Adjust The Leg Rest Length; Multi-Axis Foot Plates - Pride Mobility Jazzy 1113 Owner's Manual

V . C O M F O R T

Heavy Duty Drop-in Leg Rests (Optional)

You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests. See figure 29.

To adjust the forward/back position:

1. Remove the adjustment bolt from each side rail.
2. Move the leg rest hanger in or out to the desired position.
3. Align the adjustment holes in the leg rest hanger with
those in the side rail.
4. Reinstall each adjustment bolt to secure the leg rest
hangers.

To adjust the leg rest length:

1. Remove the adjustment screws from the leg rest
extension.
2. Slide the leg rest up or down to the desired length.
3. Align the adjustment holes in the leg rest extension
and reinstall the adjustment screws.

Multi-Axis Foot Plates

The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A),
position (B), tilt (C), and angle (D). See figure 30.
To change leg rest length (A):
1. Remove the hardware.
2. Move the leg rest to the desired position.
3. Reinstall the hardware.
To change foot plate position (B):
1. Remove the hardware.
2. Move the foot plate to the desired position.
3. Reinstall the hardware.
To change foot plate tilt (C):
1. Loosen the hardware.
2. Tilt the foot plate to the desired position.
3. Tighten the hardware.
To change foot plate angle (D):
1. Turn the setscrew clockwise to decrease the angle.
2. Turn the setscrew counterclockwise to increase the
angle.
Jazzy 1113 ATS
A D J U S T M E N T S
A
C
SETSCREW
LOCATION
Figure 30. Multi-Axis Foot Plate
www.pridemobility.com
A
B
D
B
C
D
29