Table of Contents
Advertisement
I V . C O M F O R T A D J U S T M E N T S
Armrest Height Adjustment
The armrest height adjustment range is 5 cm (2 in.).
This range is measured from the seat pan to the top of
the armrest pad.
To remove the armrest assembly:
1. Loosen the armrest lever by pushing the armrest
lever in and rotating the lever simultaneously. See
figure 16.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest
receiver. See figure 16.
2. Tighten the armrest lever.
To adjust the height:
1. Loosen the armrest lever. See figure 16.
2. Remove the armrest. See figure 16.
3. Reposition the height adjustment screw to the
desired height. See figure 17.
4. Reinstall the armrest.
5. Tighten the armrest lever.
6. Repeat for the other armrest, if necessary.
Armrest Depth Adjustment
You can adjust the depth of the armrests.
To adjust the armrest depth:
1. Loosen the two depth adjustment screws under the
armrest receiver. See figure 17.
2. Adjust the armrest to the desired depth.
3. Tighten the two screws.
4. Repeat for the other side, if necessary.
Armrest Pad Depth Adjustment
You can also adjust the depth of the amrest pads. See
figure 18.
To adjust the depth of the armrest pads:
1. Remove the four screws and their four aluminum
inserts from the bottom of the armrest pad. See
figure 18.
2. Place the four aluminum inserts into the four holes
on the bottom of the armrest pad to correspond to
the desired depth of the armrest pad.
3. Position the armrest pad as desired.
4. Reinstall the four screws and tighten.
5. Repeat for the other side, if necessary.
Sparky
ARMREST
LEVER
Figure 16. Armrest Removal/Installation
ARMREST HEIGHT
ADJUSTMENT SCREW
ARMREST DEPTH
ADJUSTMENT
SCREWS
Figure 17. Armrest Height and Depth Adjustment
ALUMINUM INSERT
Figure 18. Armrest Pad Depth Adjustment
www.pridemobility.com
ARMREST RECEIVER
SCREW
25
Advertisement
Table of Contents
