Reading The Display; Understanding The Indicator Lights; Alert; Power - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Reading the Display

Messages that indicate printer settings and alert conditions appear on the
control panel display.
Operating Messages These messages appear during normal operation of the
printer. Shown below is an operating message that indicates the printer is
online and ready to print labels:
Menu Messages When you change printing adjustments, messages appear
indicating the selections that are active and the task you are performing. For
example, when you are adjusting the darkness of your labels, a message
similar to the one shown below appears:
The asterisk (*) appears next to the current setting.
Error Messages Error messages indicate a problem with the printer or the data
from the host. The message shown below indicates the supply of thermal
transfer ribbon is depleted or jammed:
See Chapter 9 for instructions on clearing error messages.

Understanding the Indicator Lights

The control panel has three lights that indicate the current operating status of
the printer. All three are lit briefly when the printer is turned on.

Alert

This light flashes when a condition arises that requires your attention, such as
an open paper path. A message describing the alert condition is displayed. A
beep will sound at regular intervals until the problem is corrected.

Power

This light remains on as long as the printer is turned on and is receiving power.
3-4
HelvC
ONLINE
READY
DARK ADJUST
5*
RIBBON FAULT
C o d e 3 9
NugFont