Bitmap Cell Width For Graphic Or Udf, Define; Box Field, Create Or Edit - Intermec 4400 User Manual

Bitmap Cell Width for Graphic or UDF, Define

Purpose: Defines the maximum width for a graphic or any character in a font. Each
character has a width within this amount, which should be at least as wide as
the widest character in the font.
Default: n = 1
n = 10
Syntax:
x n
n values can range between 0 and 599. n is the number of columns for the
UDC, bitmap, or user-defined font.
For outline fonts, n represents the width of the base character in number of
dots.
Notes: An error code (52) is generated if the width is invalid.

Box Field, Create or Edit

Purpose: Use this command to access or create a box field n.
Default: n = 0
Syntax:
W n [, name ]
n values can range between 0 and 199.
,name is an optional field. The field can be up to eight ASCII characters, but
cannot start with a numeric character.
Parameters for the default field:
Notes:
Field origin
Field direction
Box length
Box height
Box width
NugFont
HelvC
Bitmap fonts and graphics
Outline fonts
0,0
0 degrees
100
100
1
C o d e 3 9
Printer Commands
7
7-47