Intermec EasyCoder 401 Installation Instructions
Hide thumbs
Also See for EasyCoder 401:
- User manual (21 pages) ,
- Supplementary manual (15 pages) ,
- Replacement manual (1 page)
Advertisement
Quick Links
Advertisement
Related Manuals for Intermec EasyCoder 401
Summary of Contents for Intermec EasyCoder 401
- Page 1 Installation Instructions P/N 1-960391-02 Edition 3 September 1998 EasyCoder 401 Fan Fold Kit...
- Page 2 EasyCoder 401 – Installation Instructions FAN FOLD KIT Description In addition to the internal paper roll, the EasyCoder 401 printers can also use thermal paper or receiving face material from an external supply, e.g. an external paper roll or a stack of fan-folded tickets.
- Page 3 EasyCoder 401 – Installation Instructions FAN FOLD KIT, cont'd. Description, cont'd. The guide bracket with its two guides is assembled before delivery and can be fitted in the upper slot in the rear plate by means of two screws. The outer guide is adjustable for different paper widths.
- Page 4 EasyCoder 401 – Installation Instructions FAN FOLD KIT, cont'd. Installation – The guide bracket with the two guides can be fitted either at the Fan Fold Guides upper slot in the rear plate. Insert the complete unit through the slot from the outside and attach it to the rear plate by means of the two #T20 Torx screws included in the kit.
- Page 5 Information in this manual is subject to change without prior notice and does not represent a commitment on the part of Intermec Printer AB. © Copyright Intermec PTC AB, 1998. All rights reserved. Published in Sweden. EasyCoder is a registered trademark of Intermec Technologies Corp.