iOptron SkyTracker Instruction Manual page 7

STEP 2. Attach the SkyTracker
Carefully thread the SkyTracker
mount base has a 3/8" threaded socket. If your tripod only has a 1/4" threaded post, a 1/4" to 3/8"
tripod adapter screw (not included) is needed, as shown in Figure 6.
STEP 3. Set the SkyTracker
Release Latitude lock a half turn. Set the latitude at zero mark (Figure 7) by turning the Latitude
adjustment screw and retighten the Latitude lock. Rotate the tripod to make the SkyTracker
face north by making the compass N-S perpendicular to the mount front edge (Figure 8). If the
compass does not move freely, adjust the tripod leg to make it as level as possible.
Figure 7. Set latitude to zero mark
STEP 4. Set the latitude and find the Polaris
Release Latitude lock a half turn. Set the latitude at your current latitude by turn the Latitude
adjustment screw and retighten the Latitude lock, as indicated in Figure 9. You may find your current
TM
Mount
TM
mount onto your tripod and make sure it is securely tightened. The
Figure 6. Install SkyTracker onto a tripod
TM
mount
7
1/4" to 3/8" tripod adapter
Figure 8. Face the mount north
TM
mount
N